A white wall-mounted split-system air conditioner on a blue-grey wall, with a full moon visible through a curtained window at night.

Mini Split Installation in Cañon City, CO

Tell us about the house, and a licensed contractor who covers Fremont County will get in touch.

Tell us about the job

It takes about a minute.

Step 1 of 3: Equipment
A dark, minimalist bedroom with a king-size bed, wall-mounted air conditioning unit, and large windows, with a cat sleeping on the duvet.

Nine months of heat, not a short cold snap

Cañon City needs heat September through May. That's nine months your mini-split carries the load, not just a backup for the coldest weeks. Winter nights average 15°F from December through February, and it has to keep pulling warmth from air that cold, night after night, most of the year.

Summer afternoons average 80°F, so cooling barely enters into it. A new mini-split still has to meet the federal minimum, 14.3 SEER2 for cooling and 7.5 HSPF2 for heating. What matters more here is sizing it for a long, cold winter rather than a short one.

9 months
September through May, your system heats
15°F
the average winter night it heats against
80°F
the average summer afternoon it cools against
Isometric cutaway illustration of a gray house showing two wall-mounted indoor air conditioning units in separate rooms with furniture, connected by line sets to an outdoor condenser unit on a pad outside.
Is a mini split worth it?
It depends on what you need it to do. A mini split heats and cools a room or a small addition without ductwork, and it does both from the same unit, which matters here since winter lows average 15°F and homes need heat from September through May. Most households in Cañon City heat with gas, so a mini split often works best as a way to add heat or cooling to one space rather than replace a whole system. A contractor can look at the space and tell you whether it fits what you're trying to solve.
How many rooms can a mini split cover?
A single mini split unit is sized for one room or one open area. If you need to cover several rooms, a multi-zone system connects more than one indoor unit to a single outdoor unit, and each indoor unit handles its own room. The number of zones a system can run depends on the outdoor unit's capacity, so a contractor will size it to the rooms you want covered.
Can a mini split heat a whole house?
It can, but only if the house is set up for it with enough indoor units to reach every room. A single mini split heats the room it's installed in and won't carry heat down a hallway or into a closed room. Winter nights here average 15°F, so a whole-house mini split system needs to be sized for that cold, not just for a mild day, and that is a job for a contractor to work out room by room.